Steel / TC Cross Bit For H32S Fiberglass SDA Bolt EXX Type

Steel / TC Cross Bit ForH32S fiberglass SDA bolt EXX Type

Features

Self drilling anchor system is a bolting solution for difficult ground and rock conditions.

Drill bit is used for drilling, which is installed with self drilling anchor bars. As there is no need to pull out of the anchor bar, drill bit can be used for only one time. After the anchor bars are installed, drill bits will be left in the borehole. SupAnchor provides a full range of drill bits to meet customers' requirements.

Features and Advantages

Fits SupFRP® standard Boomer, ROC and Mustang rigs. Particularly suitable for difficult ground conditions.

• Suitable for working in limited space, height and in areas of difficult access.

• Self drilling system eliminates the requirement for a cased borehole.

• Installation with simultaneous drilling and grouting possible.

• Easy installation in all directions, also upwards.

• Simple post grouting system.

• A high rate of installation since drilling, placing and grouting can be performed in one single operation.

Technical Data

R32 Drill Bit	EX	EXX	ESF	ESSF	EW
	Hardened Cross Bit for loose to medium dense ground conditions	TC Cross Bit for soft to medium rock formations	Hardened Button Bit for unconsolidated rock with boulders	TC Button Bit for medium rock formations	Clay Bit for clay, sand, loose ground & fill
Outside Diameter (mm) / Unit Weight (Kg)	D51 / 0.35 D76 / 0.75 D90 / 1.60	D51 / 0.40 D76 / 1.20 D90 / 2.30	D51 / 0.42 D76 / 1.25 D100 / 1.80	D51 / 0.47 D76 / 1.60 D100 / 1.90	D76 / 0.55 D90 / 1.06 D100 / 1.08 D110 / 1.30 D130 / 2.43
Hardness	HRC 50-55	HRA 87-89	HRC 50-55	HRA 87-89	HRC 43-48
Thread Type	ISO 10208 - R32 / Left or right
Type of Steel	EN10083-3/2006

SubNumbers

10 Years - The average seniority > 10 years, which is not common in anchor manufacturing industry.

20 Years - 20 years of exporting experience, familiar with different product standards from different

customers and countries.

26 Years - 26 years of exploration and development, SupAnchor has become the No.1 SDA bar

manufacturer in Asia.

60 Countries - customers from 60 countries. Our self drilling anchor systems have been used by

customers from 50 countries all over the world, including America, Chile, Germany,

Australia India, etc.

1,500 Projects - SupAnchor’s products have been widely used in over 1500 massive projects.

SupAnchor has its own quality tracking systems. Every batch of anchor bar has its unique batch

Being the No.1 exporter of SDA bars in Asia, quality control has been always SupAnchor’s biggest

SDA Bolt TC Cross Bit

H32S Fiberglass Bolt Cross Bit

EXX Type Steel Cross Bit

Steel / TC Cross Bit For H32S Fiberglass SDA Bolt EXX Type Images